Each Kwikset SmartCode Door Lock can hold a total of 30 user codes. Each code must between 4 and 8 digits.
Adding User Codes
- Make sure the door is open and press the programming button once
- Use the keypad to enter user codes
- On 5 button locks, each button represents two numbers (i.e. 1 and 2 for the first button). You will only need to push the button once to get either 1 or 2.
- Example: If your code is 1-2-5-6-8, you would push the buttons depicted in the image below
- Press the “Lock” button once
- The lock will flash green once and beep once if the programming was successful
- The lock will flash red three times and beep three times if the programming was unsuccessful
Removing User Codes
- Make sure the door is open and press the programming button once
- Press the “Lock” button on the keypad once
- Use the keypad to enter user code to be deleted
- On 5 button locks, each button represents two numbers (i.e. 1 and 2 for the first button). You will only need to push the button once to get either 1 or 2.
- Example: If your code is 1-2-5-6-8, you would push the buttons depicted in the image below
- Press the “Lock” button once
- Reenter the user code to be deleted
- Press the “Lock” button once again
- The lock will flash green once and beep once if the programming was successful
- The lock will flash red three times and beep three times if the programming was unsuccessful