You can manually trip an alarm in the event of an emergency by pressing the Emergency button on the touchscreen. Emergency alarms are reported without an Entry delay or Alarm Transmission delay. To manually trip an alarm: Press the Panic button on the lower front of the touchscreen. The emergency…
Disarming the System and Understanding What Happens During an Alarm
To enter the premises without immediately generating an alarm, you must use an entry/exit door and enter the correct keypad code using any user interface to disarm the system before the entry delay period expires or disarm your system using the mobile app prior to entry. The entry delay begins when…
Canceling The Arming Process
When you arm the system, the Security Status header displays a countdown of the number of seconds until the Exit Delay is over. You can cancel the arming process before it is complete. Tap the Security Status header while it is displaying a countdown. The Security app is displayed with…
Turning Off (Bypassing Zones)
To arm the system, the touchscreen requires that a sensor zone be turned off (bypassed), if it has any of the following troubles: Sensor Tamper Detected Sensor Communication Failure It is NOT necessary to bypass for other troubles. Instead, you must acknowledge the trouble before arming the system. Note: Fire/smoke…
Arming Modes
You can arm your system in one of three modes: Arm Away Arm Stay Arm Night The system uses the arming mode to determine how to react to events sent by the sensors. Depending on the arming mode, the system can delay sending an alarm and wait for the user…
Arming Your System
The system is armed and disarmed in the same manner regardless of the mode. You can arm the system via the touchscreen or mobile app using a valid keypad code. Regardless of the user interface used to arm the system, if you are leaving the premises, you must leave during…
False Alarms
If you accidentally set off your alarm, you will be able to cancel any action taken by the monitoring station by providing your secret word to the operators. For more information on what happens when an alarm happens on your system, click HERE. Option 1 Wait for the Central Monitoring…