Installation
- Put the SZ-ESW01 into wall receptacle. Make sure the receptacle is working properly. If it is controlled by a wall switch, which must be set to ON all the times.
- Attach the appliance to the SZ-ESW01.
Operation
Auto Operation:
If a power interruption should occur while the device is ON, the appliance will be set to off when power is restored.
- ON: This command will turn on the appliance to the previous setting.
- OFF: This command will turn the appliance off.
MANUAL Operation:
- ON: Press the ON/OFF button of the device to turn the appliance on.
NOTE: The appliance will be turned ON regardless of the previous setting.
- OFF: Press the ON/OFF button to turn the appliance off.
Pairing the Smart Plug
To pair they Smart Plug, press the Join/Leave button for less than 1 second. The LED will be blinking while processing. If the device has been joined with the hub successfully, the Green LED will be on for 2 seconds and then off. The Green LED will be off instantly if failed.
Troubleshooting
If the device appears to be functioning improperly, please follow the suggested steps:
- Confirm that the device is being supplied from a 120V power source.
- Confirm that the device is being controlled in proper way (local switch is ON).
- Be sure that the appliance does not exceed the current 15A limit.