Smart Bulb

Smart Bulb
Home Automation Lighting

Smart Bulb

Clint Wolford
February 22, 2018

The Sengled Element Classic is an A19 LED bulb that provides 800 lumens of light, equivalent to a 60W incandescent bulb. It will last 25000 hours and offers warm white color. Unlike a typical LED bulb, the Sengled Element Classic can be controlled wirelessly via a compatible home control or security system.

SpecificationsInstallationJoining To a HubResetting to Factory Default Settings

 

SPECIFICATIONS

  • Wirelessly turn on/off and dim via a compatible home control or security system
  • Large beam angle
  • 2700K
  • Lasts up to 25,000 hours
  • Compatible with leading home control and security systems to control lighting schedules, rules, and more

TECHNICAL SPECS

  • Power: 9.0 Watt
  • Brightness: 800 lumens
  • Beam Angle: 240 degrees
  • Input: 100-120V AC, 60Hz, 85mA
  • Socket Type: E26
  • Operating Temperature: -4° F ~ +104° F
  • Storage Temperature: -40° F ~ +158° F
  • Operating Humidity: 10% ≤ RH ≤ 95%, non-condensing

 

Installation

  • Prepare the bulb to enter paring mode.
    • Turn the light switch to OFF position prior to installing the LED bulb
    • Screw the bulb into a standard light socket and turn the switch on
    • The bulb will flash 5 times signaling it is in pairing mode
      • Brand new bulbs right out of the box will automatically enter pairing mode for three minutes upon power on.
        • If the three-minute window is missed, turning the power on/off again will will bring the bulb back into the pairing mode for another three minutes
        • If unsure if the bulb is in pairing mode, factory reset the bulb to restart the pairing mode (steps below)


Joining to the Hub

  • From the app, navigate to More > Manage Devices > Add Device > Lights
  • Select “Continue”  to begin the pairing process
  • As the devices are discovered, they will appear on the screen
  • Click “Done”

If the app does not locate your device, follow the steps below to reset your module to factory default settings and retry

 

Resetting

Turn the light on/off quickly for at minimum ten times. The bulb will blink five times indicating pairing mode.

Related Posts