The Ecolink(UEI) 4655BC0-R Door/Window sensors are designed to secure the perimeter of the residential premise, and provide the ability to add various automation services. The Door/Window sensor, which consists of a magnet that attaches to a door or window, will communicate door events to the home security system. When the magnet is moved away from the sensor, a signal will be sent to the control panel that communicates the changed state to the security system. Signals can also be used to activate a chime or convenience lighting based on system settings.
Specifications Installation Pairing Resetting
Features and Specifications
- Compact form factor
- Wide gap tolerance between sensor and magnet
- Projected 5-year battery life
- User-friendly battery replacement process
Technical Specs
- Frequency: 2.4 GHz
- Dimensions: 2.32” x 1.14” x 0.43”
- Color: White
- CR2450 Coin Battery, 5 yr
- Operating Temperature Range 32° to 122°F
- Storage Temperature Range -4° to 140°F
Installation
Please make sure that the sensor and magnet is located less than 0.25 inch from each other. For optimal performance, it is highly recommended to install the Door/Window sensor on the fixed frame and the magnet on the moving part of the door/window. Place the sensor near the top of the door that close to the opening edge of the door. This is the mounting location for the sensor.
Use the provided double-sided tape on the sensor. Attach the sensor to the door/window frame. Press firmly and hold in place for a few seconds. Secure it with silicone if needed.
Use provided double-sided tape on the magnet. Make sure the alignment of both sensor and magnet are facing each other. Press firmly and hold in place for a few seconds. Secure it with silicone if needed.
Spacers are used to raise the level of the magnet to be level/closer to sensor.
Joining to a Touchscreen
Door/Window sensors and other security sensors require a professional installer. Please contact a representative to schedule your installation today.
Joining to a Hub
- From the app, navigate to More > Manage Devices > Add Device > Door/Window Sensors
- Select “Continue” to begin the pairing process
- As the devices are discovered, they will appear on the screen
- Click “Done”
If the app does not locate your device, follow the steps below to reset your module to factory default settings and retry
Resetting
Remove the battery from the sensor.
While holding down the tamper switch, reinsert the battery.
Release the tamper switch when the LED turns green.