This article applies to the following models:
Centralite 3 Series Lamp Module
Centralite 3 Series Appliance Module
Centralite Azela Lamp Module
Centralite Azela Appliance Module
Verify that the wall outlet is powered. If the wall outlet is powered by a wall switch, then the wall switch MUST be kept ON at ALL times for the Lamp Module to function.
Navigate to your Subscriber Portal and click Settings>Lights>Add A Light to begin the pairing process.
Attach the plug from the lamp or appliance to be controlled into the outlet of the Lamp Module.
Press and hold the Lamp Module button. NOTE: The button for the AZELA models is on the side of the module.
While still holding down the Lamp Module button plug the unit back into the wall outlet. After 2 Seconds the LED will turn on.
Once the LED is on let go of the button. The LED will flash a few times every 5 seconds to signal that it is in pairing mode.