To delete a light, click Settings on the toolbar to display the settings screen. Click on Lights to display the light settings page. Click the icon next to the camera you want to modify. OR Click the icon next to the light that you want to delete and click yes on the confirmation…
Adding Lights
You can add lights when you activate Touchstone or at a later time. If you want to add a light that was not included with the original Touchstone package, make sure your service provider supports it. To add lights, click Settings on the tool bar to display the settings menu. Click…
Deleting/Modifying a Thermostat
To delete a thermostat, click Settings on the toolbar. Click Thermostats to display the thermostats settings page. Click the icon next to the thermostat you want to modify. OR Click the icon next to the thermostat you want to delete. Click yes on the confirmation dialog box that follows to remove the…
Adding a Thermostat
You can add a thermostat when you activate Touchstone, or at a later time. If you want to add a thermostat that was not included with the original Touchstone package, make sure your service provider supports it. To add a thermostat, click on SETTINGS in the toolbar. Click Thermostats to display…
Deleting/Modifying a Camera
When you delete a camera, Touchstone disables any rules that reference the camera. Snapshots and video files are not deleted. To delete a camera, click on SETTINGS in the toolbar to display the settings page. Click the cameras icon to display camera settings. Click the icon next to the…
Adding a Camera
You can add cameras when you activate Touchstone, or at a later time. If you want to add a camera that was not included with the original Touchstone package, make sure your service provider supports it. To add a camera, click SETTINGS on the toolbar. Click Cameras to display the camera…
Deleting/Modifying a Sensor
When you delete a sensor, Touchstone disables any rules that reference the sensor. To delete a sensor, click SETTINGS on the toolbar to display the settings page. Click the type of sensor that you would like to delete to display the sensor’s settings page. Click the icon next to the…
Adding a Sensor
Sensors can be added to your system during activation, or at a later time. If you want to add a sensor that was not included with the original Touchstone package, make sure your service provider supports it. Note: If you are attempting to pair a sensor that has been previously deleted…
Managing Your Hub – LEDs
The LEDs on the HUB give you an at a glance overview of what’s happening with your system at that time. They also provide critical troubleshooting information. Familiarizing yourself with the LEDs will allow you to identify potential issues with your system quicker. POWER Off – No…
Defaulting the CLIP Motion Detector
To default the CLIP Motion Sensor, remove the cover by loosening the screw at the bottom of the unit to expose the circuit board and battery. Remove the battery and press and hold the tamper spring. With the tamper spring held down, insert the battery, immediately release the tamper spring,…