MCT-302 SMA is a fully supervised wireless transmitter, used in the Touchstone system for protecting doors and windows with traditional wired sensors already installed. This highly reliable top-performance wireless device is easy to install and operate in a wide range of residential and commercial environments. A hard-wired, end-of-line (EOL)…
Tyco’s MCT-340 is is a fully supervised, wireless Door/Window sensor. Beautifully slim, it blends in to the decor of your home.The sensor includes a built-in reed switch and magnet to detect the opening and closing of a door or window. Powered by a CR2032 coin cell, it also includes a…
The Door/Window Sensor consists of a magnet that attaches to a door or window and a 2.4GHz IEEE 802.15.4 standard wireless sensor that attaches to the adjacent door or window frame. Each Door/Window Sensor continually tests its battery and notifies the control panel when they need to be changed. The…
IMPORTANT – When installing the Door/Window Sensor, remember to align the narrow end of the arrows pointing at each other. 1) The transmitter (large part of the sensor) should be mounted on the fixed surface (e.g. door frame) and the magnet (small part of the sensor) on the moving surface (e.g.…
MCT-320 SMA is a fully supervised, compact Zigbee door/window contact transmitter, designed primarily for protecting doors and windows. Suitable for any residential or commercial environment this low-profile transmitter gives the added advantage of a particularly small size that allows for highly flexible and virtually invisible installation. The MCT-320 SMA boasts…
When you delete a sensor, Touchstone disables any rules that reference the sensor. To delete a sensor, click SETTINGS on the toolbar to display the settings page. Click the type of sensor that you would like to delete to display the sensor’s settings page. Click the icon next to the…
Sensors can be added to your system during activation, or at a later time. If you want to add a sensor that was not included with the original Touchstone package, make sure your service provider supports it. Note: If you are attempting to pair a sensor that has been previously deleted…
To default the slimline door/window sensor: 1) Remove the cover using a small flathead screwdriver. 2) Remove the battery; press and hold down the tamper switch(small black button near battery). 3) With the tamper switch still held down, insert the battery and release the tamper switch. 4) The LED…
Door/Window sensors are used for monitoring entry and exit areas of your home, as well as perimeter areas. The door/window sensor can be placed on any door or window. Be sure to place the smaller magnet on the part of the surface that will have the most amount of motion(i.e.…